silicon aluminum alloy sputtering target SiAl

silicon aluminum alloy sputtering target SiAl

Goodwill Metal Tech manufactures SiAl Sputtering Target Si. Our product is consistently good in quality and purity. We also makes doped targets by customer request.

Product Details

Specification 

image.png

The silicon aluminum alloy sputtering target produced by our company adopts advanced thermal isostatic pressure technology, and the products include plane target, arc target, annular target and integral shaped tube  target with large length-diameter ratio. It has the advantages of wide proportion range (aluminum content 10at%-90at%), high purity and density, uniform grain size and long service life.The typical composition proportion of silicon aluminum target material is 90:10wt%, 70:30wt%, etc., and the composition and specification of target material can also be customized according to customer requirements.

 

TiSi alloy target

Performance

Chemical composition

Si90Al10

Si70Al30

Purity(%)

99.8

99.8

Density(g/cm³)

2.31

2.41

Grain size(um)

<100

<100

Thermal conductivity(W/m.K)

18.5

22

Size  Plane target(mm)

≤1000×250

≤1000×250

Size  Rotating target            

       Thermal spraying 

Length≤4000

Thick≤15

Length≤4000

Thick≤15

 

SiAl target 2-600a.jpg




Application

image.png



Solar photovoltaic target materials

Solar PV & Solar Heating

The company produces the target materials required for solar cells and vacuum tubes of solar water heaters, mainly Cr, Ni, Mo, si-ai, ni-cr, etc., with plane target and rotating target in shape. We can also process the target materials of special size according to the user's drawings.

Compared with the target of smelting pipe, the target of thermal isostatic pressure has the advantages of no porosity, no inclusion, uniform composition and fine grain, etc. : compared with the target of spraying pipe, the target of thermal isostatic pressure pipe has the advantages of high purity, low oxygen content, high density and good film continuity.


未命名11111111111.jpg


Analytical testingimage.png

PDS ultrasonic inspection (C-SCAN) is used for the analysis of impurities, pores, cracks and other defects in metal and non-metal materials as well as the detection of product welding bonding rate. It has the advantages of high sensitivity, convenient operation, no damage and high precision.




Hot Tags: silicon aluminum sputtering target SiAl, China, manufacturers, suppliers, factory, customized, price

Related Products

Inquiry